Tri-
C Engineering has the parts you need for
your custom automobile.
If we don't, we can make it.
We only accept Visa and
Mastercard.
Check and Money orders also accepted.
Check
out our Featured Product.
|
 Flat
Jack
Even slammed, ground hugging cars and trucks
need a jack, especially one that will slide
underneath. The Tri-C Flat Jack was designed
to solve this problem.
This jack measures only 1-1/2" high and
fully extends to 6-1/2". Made of aluminum
with a heat treated steel screw shaft. The
Flat Jack will lift up to 1,000 pounds and
the 5x13" base makes the Flat Jack Stable,
yet easy to store. Any 7/16" socket can
be used to raise the Flat Jack.
We only accept credit card payments with
Visa and Mastercard credit cards.
Check and Money orders also accepted.
|
|
Hog
Jack
Probably
the most useful jack you'll ever own.
At
only 5" wise, 19" in length and
2.5" high, the HogJack
stores in side bags easily so you can take
it with you on the rosad. Better to have
it and not need it than to need and not
have it.
The
Hog Jack has a full 7 inch
extension that allows you to easily lift
even the biggest of machines.
With it's sturdy aircraft quality aluminum
and steel construction the Hog Jack
will satisfy all of your maintenance and
storage needs.
|
Hood
Kit
 $445.00
Full page info here.
The Tri-C
Front Opening Hood Hinge Kit (click
for more) has a custom-engineered
mechanism that raises the hood 3 inches
vertically before it pivots open like a
late-model factory hood.
The
kit also works very well on cars with
blowers or scoops sticking through the
hood, allowing for tight hood clearances.
Spring-loaded latches hold the hood in
place while the front and rear tension
can easily be adjusted. The kit comes
with everything you need for installation
and is engineered from premium aluminum
and steel.
|
 The
Best Steering Column On The Market Just
Got Better
Super
Slim Tilt Steering Column
$1,250.00
The
new and improved Tri-C Tilt Column still
has the great nostalgic design that made
it so popular with hotrodders. With a
shaft that is only 1 ¾” diameter,
it gives you plenty of room when you are
behind the wheel.
It
comes complete with machined billet aluminum
housing and hub assembly, an upper shaft
with dual ball bearing and a lower shaft
with dirt and debris resistant nylatron
bushings
See
Full AD
|
High
Torque Starters
$199.95
Tired
of praying your stock 6 volt starter will
wheeze your little hotty to life?
We have the answer! The
Tri-C Starters are just what you need
and are now available for Ford Flathead,
Model A, V8-60 and Y-blocks. The Tri-C
Starters are a direct replacement to the
factory starters for reliable starts every
time. 
Find more of our products in our Catalog
by
clicking
here to shop. |
|
Nostalgic
Tilt Column
[TCN] $695.00
Nostalgic Tilt Column - Brushed Aluminum.
Find more of our products in our Catalog
by clicking
here to shop.
|
